Bona Traffic Anti Slip offers the same characteristics as the standard Bona Traffic but should be specified where extra slip resistance is required. It conforms to the DIN-Standard (51130-R10) and is ideal for areas such as staircases and corridors in schools and galleries and in food service areas.
Bona Traffic wood floor lacquer, is a two-component, waterborne, 100% polyurethane finish for the surface treatment of timber floors in commercial premises or wherever a high resistance to wear is required. It is also suitable for over coating compatible factory pre-finished timber and cork floors. Bona Traffic provides a clear natural appearance, giving almost invisible protection when the matt version is applied. However unlike an oiled hardwood floor, a floor finished with Bona Traffic requires a simple level of maintenance. Bona Traffic, is the most hard wearing of lacquers produced by Bona. Where there is a risk of side bonding, Bona Prime Classic is recommended for the initial coat on bare wood.
- VOC 2010 compliant
- Designed for use in commercial areas
- Extremely high resistance to wear
- Superb scratch, scuff and chemical resistance
- Non yellowing surface
- Meets Din Norm 18 032 and BS 7044:1990 for slip resistance
- Meets O Norm 2354 Category C (very Heavy Wear)
- Available in MATT (Invisible protection) and silk matt versions
- Recommended treatment schedules:
- On bare wood 1 x Bona Primmer plus 2-3 coats of Bona traffic or 3-4 Coats of Bona Traffic, Over coating 1-2 Coats Bona traffic
Note: Bona Traffic must be used with Bona Traffic Hardener. The Traffic Hardener must be mixed by shaking it vigorously for one minute. If small quantities of product are to be mixed, the traffic container must be shaken well before decanting product from it. Once mixed Bona traffic is viable for 5 hours
